banner



How To Clean Electric Garden Shears

Skip to content
David Domoney Logo

Quick gardening guide: How to clean garden tools


how to clean garden-tools-hanging-up

Garden tools are expensive, so it makes sense to look after them. They can last for years with proper care. And a gardener is only as good as his (or her) tools!

If your spade, shears and other tools have seen better days, here's how to bring them back to life.

Give them a good clean

Get rid of layers of dirt by washing them with soapy water. You may need to use a stiff brush to knock off some of the mud.

Then remove any rust by rubbing in circular motions with wire wool or a wire brush. Be careful not to scrape too hard, or you may cause the metal to become thin and weak.

Sharpen the edges

man-sharpening-garden-tools-with-file

Cutting blades become blunt after lots of use, so use a metal file to sharpen the edges. This works on shears, hoes and secateurs, as well as on the edge of spades.

Put a little bit of general purpose oil like WD40 on the blade before you sharpen it, and remember to move the file, not the blade.

But any damaged blades should be replaced. New blades are available from garden retailers and DIY stores.

Oil the tools

Once your tools are clean and sharp, apply a general purpose oil on the metal. Rub the oil into the surface before wiping away any excess. Let the first layer soak in and apply a second coat.

This helps prevent rust and ensure that dirt doesn't stick to the blade.

Cleaning power tools

how to clean power garden tools hedge-trimmers-man

Always disconnect the plug before cleaning power tools. Scrub off any dirt and debris and wash with hot, soapy water. Don't get any water near the electrical components.

Let the tools dry and remove any rust with wire wool.

But don't oil power tools unless advised to by the manufacturer – they don't usually need it.

Remember to check the cable and plug for any damage too.

General tool maintenance

Store tools like spades and forks by hanging them, rather than sitting them on the ground.

And clean tools as you use them – wet soil is the number one cause of rust on metal tools. Always allow tools to dry before storing them.


David Domoney 2020-08-11T13:47:28+01:00

Related Posts

5 Comments

  1. zero turn mower September 28, 2017 at 9:54 am - Reply

    Love the article. Collecting the right garden tools is the key. I was looking for the best quality garden tools products and let me tell you it's not easy. So after a long struggle, I've recently bought some quality garden tools like zero turn mower.

  2. After using my tools I wash and keep them in sunlight to dry. Is that right way to maintain them?

    • Domoney Admin May 17, 2018 at 9:33 am - Reply

      Hi William,
      Thanks for your comment. Letting tools dry in sunlight after being washed is fine, but it is a good idea to make sure they are completely dry before storing them.
      I hope this helps!

  3. Love to read the article. Getting the proper garden tools is the key. I was seeing the best feature garden tools products and let me know you it's not apparent. Keep writing.

  4. George February 11, 2019 at 5:17 pm - Reply

    Just love the way you mention about taking proper care of the garden tools specially the power tools one. As per suing oil in power tools, I have to be more careful next time. Thanks

Title

Page load link

How To Clean Electric Garden Shears

Source: https://www.daviddomoney.com/quick-gardening-guide-how-to-clean-garden-tools/

Posted by: bassmandtow1939.blogspot.com

0 Response to "How To Clean Electric Garden Shears"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel